Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Air Bag Control Module: Service and Repair
Airbag Control Module
CAUTION!
Observe safety precautions for working on airbags => [ Airbag Safety Precautions ] See: Restraint Systems/Air Bag Systems/Service
Precautions/Airbag Safety Precautions
Removing
-
Disconnect vehicle battery.
-
Remove the footwell trim => [ Footwell Trim ] See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Footwell Trim
‹› For clarity of the illustration, the trim is depicted as removed in the illustration.
-
Remove the two nuts - 1 - (2 Nm)
-
Remove the left bracket - 2 -, remove the right bracket - 3 -.
-
Open the connector lock mechanism and pull it off the control module.
-
Remove the nuts - 1 - and - 2 - (9 Nm).