Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
Ignition Switch: Service and Repair
Ignition Switch and Lock Cylinder, From 06.10
Steering Lock Housing
Ignition Switch and Lock Cylinder, From 06.10
Steering Lock Housing
CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information. Refer to => [
Battery, Disconnecting and Connecting ] See: Starting and Charging/Tools and Equipment/Battery, Disconnecting and Connecting.
CAUTION!
‹› Steering lock may be destroyed.
‹› If steering lock is operated without lock cylinder, it locks and must be replaced.
‹› Steering lock must not be operated without lock cylinder.
‹› To remove the steering lock housing, remove the steering column switch base carrier first.
Removing:
-
Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and Charging/Tools and Equipment/Battery,
Disconnecting and Connecting.
-
Remove the steering column switch base carrier.
‹› Vehicles with the Keyless Access locking and starting system, refer to => [ Steering Column Switch Base Carrier, Valeo ] See: Accessories and
Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Keyless Starting System/Service and Repair or => [ Steering Column Switch
Base Carrier, Kostal ] See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Keyless Starting System/Service and
Repair.
‹› Vehicles with ignition switch and lock cylinder, refer to => [ Steering Column Switch Base Carrier, Valeo ] See: Accessories and Optional
Equipment/Steering Mounted Controls Communication Module/Service and Repair/Steering Column Switches, From 06.10 or => [ Steering
Column Switch Base Carrier, Kostal ] See: Accessories and Optional Equipment/Steering Mounted Controls Communication Module/Service and
Repair/Steering Column Switches, From 06.10.
Lock Cylinder
Ignition Switch and Lock Cylinder, From 06.10
Lock Cylinder
CAUTION!
‹› When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information. Refer to => [
Battery, Disconnecting and Connecting ] See: Starting and Charging/Tools and Equipment/Battery, Disconnecting and Connecting.
‹› Steering lock may be destroyed.
‹› If steering lock is operated without lock cylinder, it locks and must be replaced.
‹› Steering lock must not be operated without lock cylinder.
Removing:
-
Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and Charging/Tools and Equipment/Battery,
Disconnecting and Connecting.
-
Remove steering column trim.
‹› The steering column lever, the spiral spring and the steering wheel are not shown in the illustration. Components must not be removed when
removing lock cylinder.