Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
-
Unclip the relay carrier - 1 - sideways out of E-box bracket - 2 -.
-
Remove E-box bracket - 2 - from vehicle.
Installing:
Install in reverse order of removal, noting the following:
-
Reconnect wires - 1 - to E-box in allocation marked during removal.
-
Tighten all threaded connections to the tightening specifications:
‹› M5 nuts - 1 - M5 (8 mm open-end wrench): 4.5 Nm
‹› M6 nuts - 1 - (10 mm open-end wrench): 6 Nm
‹› E-Box center screw: 9 Nm
-
Place cover - 2 - onto E-box and slide securing bracket - 1 - in - direction of arrow - until cover - 2 - is engaged.