Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-863007.png)
‹› Always remove or install driveshaft horizontally on drive flange.
-
Remove noise insulation.
-
Remove pendulum support bolts - 1 - and - 2 -.
-
Press engine and transmission forward and secure position with a suitable wood block - A -.
-
Support the front part of the exhaust system using the engine and transmission holder (V.A.G 1383 A).
-
Disconnect the exhaust system at the clamping sleeve - arrows - when removing the rear exhaust system components.
