Tiguan 4Motion (5N1) L4-2.0L Turbo (CCTA) (2009)
-
Place window regulator motor on and pull door window lightly up and down so that splines are located better between motor and cable drum.
Tightening specification for window regulator motor screws - 2 -: 3.5 Nm
-
Let window regulator drive twice upward and downward to stop respectively. By doing this, window regulator motor is normed and ready for
operation and activates pinch protection.
-
Continue by performing the steps used in removal in reverse order.
Front Door Window Recess Seal
Front Door Window
Front Door Window Recess Seal
Removing
‹› Window recess seal must not be bent when removing.
-
Remove side mirror. Refer to => [ Exterior Rearview Mirror ] See: Body and Frame/Mirrors/Service and Repair/Exterior Rearview Mirror.