Touareg V10-5.0L DSL Turbo (BKW) (2004)
/Page-2906001.png)
Television / Monitor: Description and Operation
Connecting Additional Audio/Video Units on TV Tuner
Connecting Additional Audio/Video Units on TV Tuner
To connect additional audio/video units, only use suitable adapter cables made by Votex.
Using the radio navigation system user interface, A/V input 1 and 2 can be accessed. Refer to --> Radio Navigation S2 Owner's Manual
The terminal assignment in the 54-pin connector in the line to the TV tuner is as follows:
A/V input 1 connector assignment
47
Audio signal, left
48
Audi signal, right
49
Audio/video ground
50
Super VHS (Y)
51
Super VHS (C)
52
FBAS
‹› Most standard auxiliary devices (e.g. DVD players) have an FBAS output (yellow cinch socket) for the picture signal so that the Super VHS
outputs do not need to be used in this case.
A/V input 2 connector assignment
40
Audio signal, left
41
Audi signal, right
42
Audio/video ground
43
Super VHS (Y)
44
Super VHS (C)
45
FBAS
‹› Most standard auxiliary devices (e.g. DVD players) have an FBAS output (yellow cinch socket) for the picture signal so that the Super VHS
outputs do not need to be used in this case.
