Touareg V10-5.0L DSL Turbo (BKW) (2004)
Front Door Window Regulator: Service and Repair
Front Door Windows
Window Regulator
Removing
-
Remove front door trim.
-
Remove the door window.
-
Drill out the 4 pop rivets - 3 - on the window regulator - 1 -.
-
Pry crank mechanism - 2 - out of the three locking tabs in assembly carrier.
-
Remove window regulator - 1 - from window frame.
Installation
-
When installing window regulator - 1 -, make sure that jacketed release - arrow - lies between window frame and unjacketed release.
-
Clip - 4 - must be properly locked in assembly carrier before release is installed.
Then, continue in reverse order of removal.
‹› A function test must be performed before door trim is installed