Touareg V10-5.0L DSL Turbo (BKW) (2004)
Installation
-
Install the window regulator motor with control module - 1 - and connect the connector - 2 -.
-
Tighten bolts - 3 - for window regulator motor to tightening specification 3.5 Nm.
-
Drive the window regulator up and down to the limit stops, twice. By doing this, window regulator motor is normed and ready for operation and
activates pinch protection.
Then, continue in reverse order of removal.
‹› Before installing door trim, check function of door window.