Touareg V10-5.0L DSL Turbo (BKW) (2004)
Body Emblem: Description and Operation
Name Plate Installation Instructions
‹› Warm the name plate with a hot air gun (V.A.G 1416) before removing.
‹› Use only adhesive remover (D 002 000 10) to remove any remaining adhesive.
‹› Make sure the adhesive surfaces are free of dust and grease.
‹› Install the name plate immediately after cleaning.
‹› Peel off the protective film just before installing.
‹› The temperature must be approximately 70 °F (21 °C).