Touareg V10-5.0L DSL Turbo (BKW) (2004)
-
Remove bolts - 2 - and - 4 - from the window frame.
Tightening specification: 20 Nm
-
Remove bolts from door lock.
Tightening specification: 20 Nm
-
Disconnect boot - 3 - from A-pillar and separate connectors.
-
Guide boot and connectors through opening in outer door panel.
-
Separate the connector - 2 - from window regulator motor - 2 - and guide it through the opening in the assembly carrier.
-
Remove bolts - arrows -.
Tightening specification: 8 Nm
-
Pull front part of subframe slightly away from outer door panel - arrow a -.