Touareg V10-5.0L DSL Turbo (BKW) (2004)
-
Start all four window frame bolts - arrows -.
-
Adjust height and angle of window frame precisely to contour of vehicle.
-
First tighten top bolt on hinge side.
-
Then tighten the other three bolts in the adjusting elements.
Further installation is performed in the reverse order of removal.
‹› Then perform function test.
Lock Cylinder Housing
Front Door
Lock Cylinder Housing
Removing
-
Pry cap out of lower opening - arrow a - and then pull cap out downward - arrow b -.
-
Pull the door handle - 1 - and hold it in this position. Remove the bolt - 3 - all the way. This loosens the lock cylinder housing - 2 -.