Touareg V10-5.0L DSL Turbo (BKW) (2004)
/Page-1780004.png)
‹› If the sealing plugs are removed too early, brake fluid can escape. If this occurs, unit may not be sufficiently filled or adequately bled.
-
Installation is performed in the reverse order of removal.
-
Remove brake pedal loading device (VAG 1869/2).
-
Bleed the brake system. Refer to --> [ Brake System Bleeding General Information ] See: Brake Bleeding/Service and Repair/Brake System
Bleeding General Information.
-
Enter radio code.
-
Perform ABS control module (J104) coding using the in "Guided Fault Finding".
-
After replacing the ABS control module (J104), the basic setting must also be performed.
