Touareg V10-5.0L DSL Turbo (BKW) (2004)
/Page-902006.png)
-
Lubricate free-floating axle with oil, then carefully slide in by hand and with as even a force as possible. Correct seat of full-floating axle faces
toward a clear gap to cylinder head bore - arrow -.
-
Remove tandem or fuel pump drive.
-
Position bearing cap flush with cylinder head edge using Sealant (AMV 176 501) and tighten. Tightening specifications, .
-
Install new compensating pistons. Tightening specifications, refer to.
-
Positing clamping device (T10199) and tighten camshaft gear bolt.
Tightening Specifications
