Touareg V10-5.0L DSL Turbo (BKW) (2004)
‹› MAF sensor 1 (G70).
Cylinder bank 2:
‹› MAF sensor 2 (G246).
8
6 Nm
9
Spring type clip
‹› Use pliers for spring type clamps (VAS 5024 A) to remove and install
10
Transition piece
11
Connecting pipe
12
Connecting hose
13
To turbocharger
Removing and Installing Securing Pins
Removing
-
Using an appropriate socket, turn securing pins until markings - A - on pins and - B - on housing align.
-
Remove pins upward.
Installing
-
Press pins into holes up to stop and twist them approximately 180 degrees using an appropriate socket.
Wire Connection to Compressor for Air Suspension