Touareg V10-5.0L DSL Turbo (BKW) (2004)
Safety Circuit Breaker: Service and Repair
Main Battery Switch
Main Battery Switch
CAUTION!
When disconnecting and connecting the battery, always perform the work procedure as described in the repair information --> [ Battery,
One-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, One-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will result in the deactivation of
Main Battery Switch -E74- and subsequent damage to electrical system components.
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331/)
Removing
CAUTION!
When disconnecting battery, procedure must always be followed as described in the repair information --> [ Battery, with Auxiliary
Battery or Two-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, with Auxiliary Battery or Two-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will
result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.
-
Disconnect battery --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and
Repair/Removal and Replacement/Battery, One-Battery Layout, Disconnecting and Connecting.
-
Release retaining tab - arrow - and remove cover.
-
If necessary, remove the lead coating on the multi-pin connector.
-
Open protective cap - 1 - of multi-pin harness connector, disengage retaining tab - 2 - and disconnect harness connector.