Touareg V10-5.0L DSL Turbo (BKW) (2004)
-
The battery terminal is cleaned with the bottom side of the terminal cleaner using circular motions.
CAUTION!
Risk of injury. Observe warning notes and safety precautions. Refer to --> [ Battery Safety Precautions ] See: Starting and
Charging/Battery/Description and Operation/Battery Safety Precautions!
-
Reconnect the battery and tighten the terminals to the specified torque.
‹› Optimal contact is ensured if the bolted components are tightened to the specified torque after cleaning.
Threaded Connections, Repairing
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1331)
‹› Do not use rust remover, contact spray or grease because the lack of friction will cause the torque to be exceeded when installing and this will
lead to the threaded connection breaking.
‹› The gray sanding pads are for slight contamination and suitable for "soft surfaces". The red sanding pads are for heavy contamination and suitable
for "hard surfaces".
CAUTION!
Risk of injury. Observe warning notes and safety precautions. Refer to --> [ Battery Safety Precautions ] See: Starting and
Charging/Battery/Description and Operation/Battery Safety Precautions!
-
Disconnect battery.
-
Loosen the cap nut and remove the wiring eyelet from the threaded connection.