Touareg V10-5.0L DSL Turbo (BKW) (2004)
Fuel Level Sensor: Service and Repair
Fuel Pump (FP) unit, fuel level sensor and suction jet pumps, removing and installing
Special tools, testers and auxiliary items required
^
Polydrive key T10202
^
Torque wrench VAG 1332
Requirements
^
Fuel tank must be empty, Fuel tank, emptying.
^
Connector and wiring of sensor flanges, right and left, are disconnected.
^
Seals of sensor flanges, right and left, are unscrewed.
Work sequence
-
Read safety precautions. Refer to safety precautions
-
Disconnect harness connectors - 1 - and - 2 -, and hose couplings - 3 -, - 4 - and - 5 - below right sensor flange.
-
Remove sensor flange.
-
Unclip black fill hose - arrow - from Fuel Pump (FP) unit housing on right and left side of fuel tank.