Touareg V10-5.0L DSL Turbo (BKW) (2004)
Transmission Position Switch/Sensor: Service and Repair
Tiptronic Switch F189, Removing and Installing
Tiptronic switch F189, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G1 783
Removing
-
Remove selector lever handle.
-
The procedure for disconnecting the battery must be adhered to.
-
Disconnect battery Ground (GND) strap with ignition switched off
-
Remove cover from center console
-
Remove bolts - arrows - from center console.
The tiptronic switch F189 is integrated into wiring harness for both solenoids.
-
Release connector - 1 - and pull off.
-
Remove bolt - 2 - and remove retainer.
-
Pull connector - 3 - out from retainer.
-
Separate connectors from solenoids.