Touareg V10-5.0L DSL Turbo (BKW) (2004)
Note:
DO NOT erase fault memory! The programming requires two update cycles.
After the first cycle, DO NOT select the forward arrow on navigation bar and DO NOT erase fault codes. The second cycle must be started first.
If the second cycle is accidentally skipped, the GND wire of the (comfort battery) has to be disconnected and after 10 minutes reconnected in order to
reset the system.
^
Select "Update Programming" to initiate second cycle.
Similar screen appears.
^
Select forward arrow on navigation bar.
Note:
DO NOT interrupt or cancel programming procedure.
After second programming cycle:
^
Switch ignition OFF and back ON.