volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Airbag Units, Removing and Installing After an Accident|Page 12323 > < Diagram Information and Instructions|Page 12317
Page 1
background image

Repairs and Inspections Required After a Collision: Service and Repair
Airbag Units, Removing and Installing After an Accident

Airbag Units, Removing and Installing After an Accident

Accident with Airbag Deployment

‹› The airbag control module does not need to be replaced after deployment  unless "Control module faulty" DTC is set in the control module,  or the

control module is physically damaged.

Always replace the following components after an accident  when airbag has deployed:

‹› All deployed airbag units

‹› Support for front passenger module

‹› Coil connector with slip ring

‹› All seat belts with triggered belt tensioners

‹› If needed (visual inspection), the following must also be replaced:  All damaged components

Accident without Airbag Deployment

‹› The airbag control module does not need to be replaced after deployment  unless "Control module faulty" DTC is set in the control module,  or the

control module is physically damaged.

‹› If Airbag Malfunction Indicator Lamp (MIL) (K75) does not indicate a DTC, airbag components do not need to be replaced.  Seat belts must be

inspected separately.

Airbag Units, Removing and Installing After an Accident|Page 12323 > < Diagram Information and Instructions|Page 12317