Touareg V10-5.0L DSL Turbo (BKW) (2004)
/Page-2291002.png)
Installing
Installation is the reverse of removal, with special attention to the following:
-
Tighten tie rod using open-jaw torque wrench insert (VAG 1923).
-
Check boot for wear (slits, cracks) and check sealing surfaces of boot for dirt.
-
Install bellows and clamp.
‹› Only use original clamps.
-
Tighten clamp using locking pliers (VAS 6199) as far as shown in illustration.
