Touareg V10-5.0L DSL Turbo (BKW) (2004)
‹› Only rotate at rolling piston --> [ (Item 5) Rolling piston ] See: Removal and Replacement/Front Suspension/Air Spring Damper Components
when doing so in order to avoid damaging boot --> [ (Item 4) Boot ] See: Removal and Replacement/Front Suspension/Air Spring Damper
Components inside air spring.
-
Residual pressure retaining valve - 1 - points in opposite direction of CDC valve - 2 -.
-
Slide boot onto air spring and secure with a new clamp.
-
Position mounting bracket and secure air spring with bolts - A arrows -. Counter hold at bracket when doing so to prevent boot from rotating.
Point - arrow B - must point in direction of residual pressure retaining valve.
-
Fill air spring damper. Refer to --> [ Air Spring Damper, Filling ] See: Procedures/Front Suspension/Air Spring Damper, Filling.
-
Align air spring again so that residual pressure retaining valve - 1 - is located exactly on imaginary symmetrical axis - arrow - on air spring
damper.