Touareg V10-5.0L DSL Turbo (BKW) (2004)
Shift Cable: Removal and Replacement
Selector Lever Cable
‹› Tying a line to the cable before removing it, will make it possible to thread the cable back in when installing.
Removing
-
Remove shift mechanism. Refer to --> [ Selector Mechanism ] See: Shifter A/T/Service and Repair/Removal and Replacement/Selector
Mechanism.
-
Push boot - arrow - forward and out from the shift unit.
To remove the selector lever cable, the transfer case only needs to be lowered.
-
Lower the transfer case.
-
Remove locking washer - 1 -.
-
Pull selector lever cable - 2 - from lever/selector shaft.
Installing
-
Insert selector lever cable into the shift unit - 1 -.