volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Valve Body, A/T|Description and Operation|Page 7279 > < Diagram Information and Instructions|Page 7275
Page 1
background image

Valve Body: Description and Operation

Valve Body Assembly Overview

The valve body and/or the lines can be removed and installed  with transmission either removed or installed.

1

 Solenoid valve 2 (N89)

2

Connector for transmission output speed (RPM) sensor (G195)

‹› The sensor is located behind the valve body.

‹› Removing and installing, refer to --> [ Transmission Output Speed Sensor ] See: Sensors and Switches - A/T/Transmission Speed

Sensor/Service and Repair.

3

Automatic transmission hydraulic pressure sensor 2 (G194)

‹› Not on transmissions that were installed from 11.05.

‹› Allocation.

‹› Removing and installing, refer to --> [ Hydraulic Pressure Sensors 1 and 2 ] See: Fluid Pressure Sensor/Switch/Service and Repair.

4

Automatic transmission hydraulic pressure sensor 1 (G193)

‹› Not on transmissions that were installed from 11.05.

‹› Allocation

‹› Removing and installing, refer to --> [ Hydraulic Pressure Sensors 1 and 2 ] See: Fluid Pressure Sensor/Switch/Service and Repair.

Valve Body, A/T|Description and Operation|Page 7279 > < Diagram Information and Instructions|Page 7275