Touareg V10-5.0L DSL Turbo (BKW) (2004)
7. Threaded rod M20 (T10205/8-1)
-
Connect pressure gauge w/connection (VAS 6179/1) between hydraulic cylinder (VAS 6178) and hydraulic line of hydraulic cylinder (VAS
6178).
Pressures, described in the following, apply only to the hydraulic cylinder (VAS 6178).
Shortly before pressing-in procedure is completed, readout pressure must be between 30 and 100 bar.
Maximum pressure must not exceed 140 bar.
-
Press in wheel hub until stop.
-
Install the drive axle. Refer to See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Front Suspension/Drive Axle.
Further installation is in the reverse sequence to removal.