Touareg V10-5.0L DSL Turbo (BKW) (2004)
/Page-1625019.png)
Installing
-
Drive in new seal until seated.
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128 A1).
Before installing the flange shaft, check the dust cap for damage. Replace the dust cap if necessary. Refer to--> [ Dust Cap for Flange Shaft,
Replacing ] See: Left Flange Shaft Seal.
-
Remove old circlip - A - from groove in flange shaft using pliers.
