Touareg V10-5.0L DSL Turbo (BKW) (2004)
/Page-1709006.png)
-
For this, align the bolts - A - and/or the notch - arrow - on pressure piece (T10214/3) centrally to the holes in the transmission carrier.
The spacing "x" must be the same.
-
Now, press the bonded rubber bushing into the transmission carrier, until the guide sleeve (T10214/2) can be turned by hand - arrows -.
Do not press the bonded rubber bushing any deeper into the transmission carrier than the height of the tube (3296), if necessary press
further using base block (VW 441) up to stop.
-
Install transmission carrier. Refer to --> [ Transmission Carrier and Bracket ] See: Transmission Carrier and Bracket.
