volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Throttle Position Sensor|Locations|Page 3158 > < Throttle Position Sensor|Locations|Page 3156
Page 3
background image

Terminal 6 + socket 17

Wire resistance: max. 1.5ohms

-

Also check wires for short circuit to each other, to vehicle Ground  (GND) and to B+.

Specified value: infinite ohms

If no malfunction is detected in the wiring and if the voltage supply  was OK:

-

Replace Throttle Position (TP) Sensor (G79).

-

Erase DTC memory of Engine Control Module (ECM) --> [ Diagnostic Mode 04 - Erase DTC Memory ] .

-

Generate readiness code --> [ Readiness Code ] See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes. 

Throttle Position Sensor|Locations|Page 3158 > < Throttle Position Sensor|Locations|Page 3156