Touareg V10-5.0L DSL Turbo (BWF) (2006)
/Page-134001.png)
Control Module: All Technical Service Bulletins
A/T - PRNDS Indicator ON/DTC's Set
38 07 01
May 3, 2007
2014708
Affected Vehicles
Condition
Transmission, "PRNDS" Indicator Illuminated in Instrument Cluster
Technical Background
Automatic transmissions may switch to emergency mode when DTCs are present.
DTCs are displayed correctly on VAS 5051/5052 Scan Tool refer to the table.
Illumination of "PRNDS" Indicator may be caused by:
1.
Multi-function switch implausible signal or solenoid valve (N88, N89, N90, N91, N92, N93, N282, N283) disruption to positive.
2.
DTC 00293 caused by damaged wiring between TCM and T10s connector to multi-function switch.
3.
Remaining DTCs may be caused by damaged wiring between TCM and T14e connectors.
Production Solution
Not applicable.
Service
1.
Connect VAS 5051/5052 Scan Tool to view fault memory and run through Guided Fault Finding (GFF) test plan.
2.
Read fault memory and run through (GFF) test plan.
3.
Check affected solenoid resistance at connector plug T14e or T10s on transmission housing and at wiring harness connection to Transmission
Control Module (TCM). Target values are in (GFF) test plan. (Refer to pin assignment in (GFF) test plan)
