Touareg V6-3.2L (BMX) (2005)
Verification
^
Verify all Inner Door Release Handles for correct return operation.
Tip:
Inner Door Release Handle must fully return to the closed position when exiting the vehicle.
Procedure
If Inner Door Release Handle remains in open position:
^
Remove affected door trim. See ElsaWeb, Repair Manual, Body Interior, 70 - Trim, Noise Insulation.
The Bowden Cable must be secured to inner door trim.
Verify the affected door trim has a metal retaining clip -circle-.
If there is no metal retaining clip:
^
Drill a 5 mm diameter, 10 mm deep hole in door trim at -arrow- while using a drill stop.
NOTE:
Damage will occur if drilled deeper then 10 mm.
^
Place 1-2 drops of adhesive on tie wrap retainer and insert it into hole, see Required Parts and Tools.
^
Secure Bowden Cable to tie wrap -ellipse-.