volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 16723 > < Diagram Information and Instructions|Page 16720
Page 1
background image

Trunk / Liftgate Motor: Procedures

Rear Lid

Hydraulic Oil, Filling and Checking Level

‹› The hydraulic system is self-bleeding and maintenance-free. To bleed  the system, open and close the rear lid 2 or 3 times automatically.

‹› The rear lid hydraulic drive is a closed hydraulic system. As a rule,  a filling is only required after opening the hydraulic circuit (for example,  after

replacing parts).

‹› Always support the rear lid whenever working on the hydraulic system. 

‹› Hydraulic system is sensitive to any ingress of dirt.

‹› Leaking oil should be collected and disposed of properly.

‹› After working on hydraulic system, check the oil level before operating  and correct if necessary.

CAUTION!
Hydraulic oil damages paint. If hydraulic oil comes into contact with  painted surfaces, remove oil immediately.

Hydraulic oil and cleaning materials contaminated with hydraulic oil  must be disposed of properly.

Too much oil will damage the system.

If the oil level is too low, the rear lid will not open or close completely.  The pump will also make noises.

Hydraulic Oil, Filling and Checking Level

Procedures|Page 16723 > < Diagram Information and Instructions|Page 16720