Touareg V6-3.2L (BMX) (2005)
Removing
-
Remove roof end strip --> [ Roof End Strip ] See: Roof End Strip.
-
Pull D-pillar trim out of mountings in body and door seal molding.
Installing
-
Perform the steps used for removal in reverse order.
‹› Before installing, inspect the securing clips for damage and replace if necessary.
Footwell Covers
Footwell Covers
Removing
-
Switch off ignition.
-
Pry passenger-side footwell cover - 1 - out of mountings near the clips - 2 - using wedge (T10039/1).
-
Pull cover out of rear mountings.
-
Disconnect the wiring harness from the footwell light - 3 -.
-
Remove the bolt - 4 -.
-
Pry driver-side footwell cover - 5 - out of mountings near the clip - 6 - using wedge (T10039/1).