Touareg V6-3.2L (BMX) (2005)
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
‹› Piston resetting tool (T10145)
Removing
-
Force piston from brake caliper housing, one at a time, using compressed air.
Only one piston can be pressed out at a time. Secure opposite piston in brake caliper housing using piston resetting tool - a -. Block the other pistons,
e.g. using wood blocks - b -. In addition, place a wooden board - c - in front of the piston resetting tool so that the piston will not be damaged when
pressed out.
-
Remove seal with trim removal wedge (3409).
When removing, make sure that surface of piston bore is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with assembly paste (G 052 150 A2) before inserting.
-
Insert oil seal into the piston bore.