Touareg V6-3.2L (BMX) (2005)
-
Force piston out of brake caliper housing using compressed air.
Set a piece of wood into the valley, so that the piston is not damaged.
-
Remove protective cap from brake caliper with disassembly wedge 3409.
A - Protective covers
-
Remove oil seal with disassembly wedge 3409.
When removing make sure that the surface of the cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
-
Insert oil seal into brake caliper.