Touareg V6-3.2L (BMX) (2005)
/Page-797002.png)
‹› Both camshaft adjusters (identification: "24E" on intake side and "32A" on exhaust side) can only bolted in one position on the camshaft
mountings - arrows - by an alignment pin.
-
Now turn sensor wheel - 1 - on intake camshaft adjuster clockwise - in direction of arrow - until it stops and hold the adjuster in this position.
‹› If the intake camshaft adjuster is attached to the camshaft, the adjuster must be rotated left accordingly with the chain sprocket and then the
camshaft roller chain must be routed.
-
Ensure the camshaft roller chain rests against the guide rail - 1 - tautly and does not hang through.
