Touareg V6-3.2L (BMX) (2005)
Special tools, testers and auxiliary items required
‹› Torque wrench (5 to 50 Nm) (V.A.G 1331)
‹› Locking fluid (D 000 600 A2)
Procedure
Make sure crankshaft/sensor wheel contact surfaces are free of oil and grease.
-
Apply a thin coat of locking compound (D 000 600 A2) to contact surfaces of crankshaft and sensor wheel for additional security.
-
Check that when installing "VR6" - arrow - is marked at individual threaded holes.
-
Tighten all new bolts by hand.
-
Tighten securing bolt - 1 - to 10 Nm + 1/ 4 turn (90°).
-
Tighten securing bolts - 2 - to 10 Nm + 1/ 4 turn (90°).