Touareg V6-3.2L (BMX) (2005)
/Page-898004.png)
-
Insert the camshaft bar (T10068 A) into both shaft grooves.
-
Remove the small intermediate shaft chain sprocket. The large chain sprocket may not be removed.
-
Route chain between tensioning rail and guide rail toward control housing.
-
Position the timing chain on the camshaft adjuster so the two individual copper colored chain links - 4 - align with the markings on the camshaft
adjuster - 3 - and on the control housing - 5 -. Markings on control housing --> [ Markings on Control Housing with MPI Engines ] See: Cylinder
Head Assembly/Testing and Inspection
