volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Fuel Pump, Checking|Page 4460 > < Fuel Pump, Checking|Page 4458
Page 3
background image

CAUTION!
Danger of spraying when opening shut-off valve; wear protective goggles  and protective clothing to prevent injuries and contact with
skin. Hold container  in front of open connection of pressure measuring device.

-

Close the shut-off valve of High pressure fuel gauge. 

-

Press switch on the Hand held remote control (jumper) while opening the shut-off valve slowly until 4 bar positive pressure  is indicated on
pressure gauge. Do not change position of the shut-off valve. 

-

Empty into the measuring container.

Delivery rate of the fuel pump is dependent on the battery voltage. 

-

Operate the remote control for 30 seconds.

-

 Using a Multimeter, check battery voltage while  the fuel pump is running.

-

Compare the fuel quantity pumped with the specified value.

*) Minimum delivery rate cm3/30 s

**) Voltage at the fuel pump with the engine off and the fuel pump  running (approx. 2 V less than battery voltage).

Read-out example:

During test, a voltage of 12.5 V is measured at battery. Since voltage  at the pump is approx. 2 V less than battery voltage, there is a minimum delivery
 rate of approx. 580 cm3/30 s.

If the minimum delivery rate is not obtained:

Fuel Pump, Checking|Page 4460 > < Fuel Pump, Checking|Page 4458