Touareg V6-3.2L (BMX) (2005)
Catalytic Converter: Service and Repair
Exhaust Manifold and Exhaust Pipe with Catalytic Converters
Exhaust Manifold and Exhaust Pipe with Catalytic Converters
‹› After working on the exhaust system ensure that the system has sufficient clearance from the bodywork. If necessary, loosen the flange on the
catalytic converter and realign mufflers and exhaust pipes --> [ Aligning Exhaust System ] See: Muffler/Service and Repair
Special tools, testers and auxiliary items required
‹› Ring spanner 7-piece set for oxygen sensor (3337)
‹› Torque wrench (5 to 50 Nm) (V.A.G 1331)
‹› Torque wrench (40 to 200 Nm) (V.A.G 1332)
Removing
-
Disconnect batteries:
‹› The procedure must be strictly followed!
-
Pull vacuum hoses - 1 - from intake manifold.
-
Pull vacuum hose - 4 - from intake manifold.
-
Pull pressure hose off secondary air injection pump - arrow -.