Touareg V6-3.2L (BMX) (2005)
/Page-993002.png)
‹› Replace
6
Primary catalytic converter
‹› Installed in the exhaust gas stream of cylinders 1, 2 and 3
7
Primary catalytic converter
‹› Installed in the exhaust gas stream of cylinders 4, 5 and 6
8
Heated oxygen sensor (G39), 50 Nm
‹› Installed in the exhaust gas stream of cylinders 1, 2 and 3
‹› Grease thread only with (G 052 112 A3); do not let (G 052 112 A3) get onto slits of oxygen sensor body.
‹› Use ring spanner set for oxygen sensor (3337) for removal and installation
9
Heated Oxygen Sensor (HO2S) 2 (G108), 50 Nm
‹› Installed in the exhaust gas stream of cylinders 4, 5 and 6
‹› Grease thread only with (G 052 112 A3); do not let (G 052 112 A3) get onto slits of oxygen sensor body.
‹› Use ring spanner set for oxygen sensor (3337) for removal and installation
10
Catalytic converter
11
25 Nm
12
Oxygen sensor behind three way catalytic converter (G130), 50 Nm
‹› Installed in the exhaust gas stream of cylinders 1, 2 and 3
‹› Grease thread only with (G 052 112 A3); do not let (G 052 112 A3) get onto slits of oxygen sensor body.
‹› Use ring spanner set for oxygen sensor (3337) for removal and installation
13
Oxygen Sensor (O2S) 2 behind Three Way Catalytic Converter (TWC) (G131), 50 Nm
‹› Installed in the exhaust gas stream of cylinders 4, 5 and 6
‹› Grease thread only with (G 052 112 A3); do not let (G 052 112 A3) get onto slits of oxygen sensor body.
‹› Use ring spanner set for oxygen sensor (3337) for removal and installation
14
Heat shield
‹› With intake manifold support
15
23 Nm
16
20 Nm
17
Bracket
18
23 Nm
