volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 19440 > < Diagram Information and Instructions|Page 19438
Page 1
background image

Headlamp Alignment Control Module: Service and Repair

Headlamp Range Control Modules J567 / J568, Servicing

General information

Control of the automatic vertical headlight beam adjusting system takes place via two dedicated control modules.

The left HID headlamp is controlled by Left Headlamp Range Control Module J567 which is located directly under the left headlamp.

The right HID headlamp is controlled by Right Headlamp Range Control Module J568 which is located directly under the right headlamp.

Headlamp Range Control Modules J567 /J568, removing and installing

NOTE:

-

Illustrations depict replacement of left headlamp range control module.

-

Replacement of left and right modules is the same.

-

Should control module be replaced, it must be coded.

Removing:

CAUTION:

-

Switch off all electrical consumers.

-

Switch off ignition and remove ignition key.

-

Remove headlamp

-

Remove screws - arrows - of adjusting shaft for lateral adjustment.

-

Remove adjusting shaft for lateral adjustment.

-

Remove screws - arrows - at headlamp range control module -1

-

Remove headlamp range control module -1- from housing.

Diagram Information and Instructions|Page 19440 > < Diagram Information and Instructions|Page 19438