Touareg V6-3.2L (BMX) (2005)
Tail Lamp: Service and Repair
Tail Lamps
Side Panel Tail Lamps
Tail Lamps
Side Panel Tail Lamps
Removing
CAUTION!
‹› Do not pry out back-up lamp using a screwdriver, plastic wedge or similar tool.
‹› There is the danger of damaging the taillamp assembly or vehicle paint.
‹› If taillamp assembly cannot be disengaged by hand, the hook for front end (3370) can be used as an aid as described below.
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Unclip cover caps - arrows - of mounting bolts at tail lamp assembly.
-
Remove screws - arrows -.
‹› Housing for tail lamp assembly is also secured to mounting bolts with a ball head in a securing clip. For deviating gap dimensions, an adjustable
tail lamp assembly carrier must be installed with a plastic clip nut --> [ Adjustable Tail Lamp Assembly Carrier in Side Panel ].
CAUTION!