volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

General Information|Page 3363 > < Ride Height|Page 3360
Page 1
background image

Alignment: Description and Operation
General Information

General Information 

Wheel alignment on the vehicle should only be measured with alignment equipment approved by VW.

Each time wheels are aligned, both front and rear wheels must be aligned.

Otherwise the center position of the steering rack cannot be guaranteed.

If the steering wheel is off-center, the basic setting for the steering angle sensor must be checked.

-

Perform wheel alignment using the alignment machine.

You can find all the information you need for a wheel alignment in the alignment computer.

Current data Updates are stored on VW Service Net.

VW Service Net; Wheel Alignment Software; Beissbarth Wheel Alignment Machine Software Updates

VW Service Net; Wheel Alignment Software; Hunter Wheel Alignment Machine Software Updates

VW Service Net; Wheel Alignment Software; Wheel Alignment Machine Software Updates

Note: 
^

Do not carry out wheel alignment until the vehicle has been driven 1000 to 2000 km, because the coil springs will not have settled until then.

^

The individual specifications should be followed as exactly as possible when making adjustments.

General Information|Page 3363 > < Ride Height|Page 3360