volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Converter With Socket, 12V and 230V|Page 11235 > < Electrical Equipment|Page 11229
Page 1
background image

Auxiliary Power Outlet: Description and Operation
Converter With Socket, 12V and 230V

Luggage Compartment Lamps and Switches

Converter with Socket, 12V and 230V

Socket 12V, 230V - 1 - is installed in side wall trim  on right side in luggage compartment. Converter is installed on a retainer  on right rear wheel
housing and is joined permanently to the socket.

CAUTION!
‹› The Converter with Socket, 12V, 230V (U13) housing  contains chargeable capacitors.

‹› There is a danger of electric shock.

‹› The housing of Converter with Socket, 12V, 230V (U13) must not be opened under any circumstances.

Special tools, testers and auxiliary items required

‹› Trim removal wedge (3409)

‹› When removing and installing components in a visible area (switches,  covers, trim, etc.), mask off the areas at which a prying tool (trim removal

wedge (3409), screwdriver) will be positioned,  using commercially available adhesive tape.

‹› No repairs may be performed on the harness connector, on the wires  and the 230V-outlet.

‹› If there is a fault at harness connector, at wires, at 230V-socket  or in the converter, the complete unit must always be replaced.

Removing

-

Switch off ignition, switch off all electrical consumers and remove  ignition key.

-

Remove right side panel trim in luggage compartment

-

Push the two retaining tabs - 3 - outward in -  direction of arrow - and pull socket - 2 - toward rear  out of socket mount - 1 - in side trim.

Converter With Socket, 12V and 230V|Page 11235 > < Electrical Equipment|Page 11229