volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 5558 > < Diagram Information and Instructions|Page 5556
Page 4
background image

-

Switch ignition on.

Specified value: at least 4.5 V

-

Switch ignition off.

If there is no voltage:

-

Check signal and Ground (GND) wires of Mass Air Flow (MAF) sensor.

Checking signal and Ground wires of Mass Air Flow (MAF)  Sensor

-

Disconnect 5-pin connector from Mass Air Flow (MAF) Sensor  (G70) with Intake Air Temperature (IAT) Sensor  (G42) (arrow).

-

Connect test box.

-

Check wires between test box and 5-pin connector for open circuit  according to wiring diagram.

Diagram Information and Instructions|Page 5558 > < Diagram Information and Instructions|Page 5556