volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Fuel Tank With Assembly Components, Disassembling and Assembling|Page 6797 > < Fuel Tank With Assembly Components, Disassembling and Assembling
Page 2
background image

11. 20 Nm plus an additional 1/4 turn (90 degrees )
12. Protective cover

-

For fuel tank, top

13. Vacuum booster

-

Right side

-

Is clipped in at bottom of container

14. Fuel pump (FP) unit

-

Right side

-

Checking Fuel Pumps (FP).

15. Sender for fuel gauge -G-

-

Right side

-

Is clipped in at bottom of container

16. Flange

-

Right side

-

With gravity valve

-

To remove fuel tank, fuel tank may only be half full.

-

Note installation position at fuel tank, see Fig. 2

-

Individual components, see Fig. 3

-

With fuel pressure regulator: checking fuel pressure regulator., checking fuel pressure regulator and residual pressure

17. Ventilation line

-

Check for secure seating

18. Expansion tank
19. Gravity valve
20. To pressure retaining valve

Fig. 2 Installation position of Fuel Pumps (FP) units flange

-

Install flange left or right with marking in direction of travel (arrow).

Fig. 3 Individual components at flange, right side

1. Electrical connection for Fuel Pump (FP) and sender for fuel gauge
2. Fuel pressure regulator (4 bar)

-

checking fuel pressure regulator and residual pressure

3. Ground (GND) wire

-

Check for secure seating

4. Pressure regulator inlet (from fuel filter)
5. Connection to Fuel Pump (FP) unit right and left (without pressure)
6. Gravity valve

Fuel Tank With Assembly Components, Disassembling and Assembling|Page 6797 > < Fuel Tank With Assembly Components, Disassembling and Assembling