Touareg V6-3.2L (BMX) (2005)
Multi-pin connector 3, 8-pin for loudspeaker output
1. Right rear speaker -
2. Right front speaker -
3. Left front speaker -
4. Left rear speaker -
5. Right rear speaker -
6. Right front speaker -
7. Left front speaker -
8. Left rear speaker -
Multi-pin connector 4, 8-pin for power supply and CAN Bus
9. CAN Bus - High
10. CAN Bus- Low
11. Telephone mute circuit
12. Ground (GND) ((terminal 31))
13. Connection for ignition key controlled switching on and off (S contact)
14. Anti-theft alarm system contact
15. Battery - (B- - terminal 30)
16. Anti-theft system control signal, SAFE (terminal 30)
Multi-pin connector 5, 12-pin for telephone signal pre-amplifier output signal (where applicable)
1. External audio input, left
2. External audio input, Ground (GND)
3. Line out. left
4. not assigned
5. Navigation instructions Nf -
6. Telephone input signal, TEL-
7. External audio input, right
8. Line out, Ground (GND)
9. Line out, right
10. not assigned
11. Navigation instructions Nf -
12. Telephone input signal, TEL-
Multi-pin connector 6, 12-pin for CD Changer control and CD audio input signal
1. Right headphone audio output - (where applicable)
2. CD Changer, left and right channel, Ground (GND)
3. Headphone audio output - (where applicable)
4. CD Changer, terminal 30 voltage supply (+)
5. Left headphone audio output - (where applicable)
6. CD Changer, bus DATA OUT (CD Changer control signal from radio to CD Changer)
7. not assigned
8. CD Changer, left channel, CD/L
9. CD Changer, right channel, CD/R
10. CD Changer, control signal
11. CD Changer, bus DATA IN (CD Changer control signal from CD Changer to radio)
12. CD Changer, bus CLOCK (internal check protocol that monitors data flow)
Connectors 7 and 8, antenna connections
1. Transparent connection for antenna input signal, FM from antenna module
2. Brown connection for antenna output signal FM to antenna module (diversity, antenna selection)