Touareg V6-3.2L (BMX) (2005)
/Page-91002.png)
-
Unclip retainer for electrical connection -1- in direction of - arrow - and disconnect electrical connection.
-
Press electrical connection lock at motor -2- in direction - arrow - and disconnect electrical connection.
Installing:
Install in reverse order of removal, noting the following:
CAUTION: When installing module, ensure gasket is properly seated. Water intrusion will damage headlamp.
NOTE:
-
After installing a new control module, it must be coded:
Coding Left Headlamp Range Control Module J567.
Coding Right Headlamp Range Control Module J568.
-
Perform functional check of headlamp.
-
Perform headlamp "Basic Setting" in conjunction with checking headlamp aim
Left Headlamp Range Control Module J567, coding
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnosis, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Electrical Equipment
-
01- On Board Diagnostic (OBD) capable systems
-
Automatic headlamp range control
-
Functions of vertical headlamp aim control
-
Coding Control Module for Left Lamp Control
NOTE: After coding control module, perform headlamp "Basic Setting" in conjunction with checking headlamp aim.
Right Headlamp Range Control Module J568, coding
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051A.
-
In Vehicle Diagnosis, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
-
Body
-
Electrical Equipment
-
01- On Board Diagnostic (OBD) capable systems
-
Automatic headlamp range control
-
Functions of vertical headlamp aim control
-
Coding Control Module for Right Lamp Control
NOTE: After coding control module, perform headlamp "Basic Setting" in conjunction with checking headlamp aim.
