Touareg V6-3.2L (BMX) (2005)
-
Remove seal (see Repair Manual Group 72 Seat frames "12-way seat, removing and installing".
-
Carefully separate connectors -1- of harness to side airbag igniter -N199- (driver seat) or -N200- (passenger seat).
Tip:
Drawing is used to illustrate connector location only seat does not have to be disassembled for repair.
-
Remove male and female side of the Yazaki connector (as shown) by cutting one wire at a time.
-
Discard connectors.
Using butt splice crimping tool VAS 1978/24:
-
Splice the harness together using two 4in. sections of Repair wire Part No: 000 979 010 (from VAS 1978AR wiring repair kit) and 4 butt connectors
Part No: 111 971 941A) from wiring harness repair kit 1978.
^
This allows the harness additional slack.
-
Wrap all repaired wires using yellow electrical tape to indicate that the wiring has been modified.
-
Secure the harness with tie straps.