Touareg V6-3.2L (BMX) (2005)
1. Hydraulic press (VAS 6178) with pressure head (T10205/13)
2. Thrust plate (T10230/7)
3. Tube (T10230/14)
4. Lower control arm
5. Press piece (T10230/15)
6. Spindle (T10230/1) and Nut (T10230/2)
CAUTION!
Before removing, place engine and transmission jack (VAG 1383 A) with universal mount underneath cylinder, cylinder may fall down
at end of pressing out procedure.
-
Press out bonded rubber bushing.
Installing
-
Extend clear area on outer diameter of bonded rubber bushing, using for example a felt-tip marker.
-
Attach tools onto lower control arm, as shown in illustration.
1. Hydraulic press (VAS 6178) with pressure head (T10205/13)
2. Thrust plate (T10230/12)
3. Bonded rubber bushing